An enterprise specializing in the development, production and sales of food packaging machines
Main production of sealing machine, sealing and cutting machine, packaging machine, bag feeding machine, vacuum packaging machine
AD0I8OirCBAEGAAgwIK53AUojbucPjAjOCU
7 * 24 hours at your service
18986097767
027-86930255

Causes and solutions of dripping in liquid filling machine

作者:大诚机械 Published: 2019-07-19 10:04 Author: Big-Machinery

Causes and solutions of dripping in liquid filling machine

The liquid filling machine sometimes has dripping, which may be related to the use method. The liquid filling machine is accompanied by an instruction manual. According to the liquid filling machine operating instructions to debug the machine, the situation of the dripping can generally be resolved If the operation error is ruled out, it is likely that it is the equipment filling. Next, the reasons and solutions for the dripping of the liquid filling machine will be introduced.

Liquid filling machine

Reasons and solutions for dripping of liquid filling machine:

1. The reason for the dripping phenomenon of the liquid filling machine may be that the o-ring in the liquid filling machine is corroded or seriously worn. This requires us to repair the o-rings.

2. It is also possible that the ball valve in the liquid filling head has been damaged or loose. At this time we have to look at the inner ball valve of the filling head. If the inner ball valve of the filling head is damaged, the ball valve needs to be replaced.

3. Observe whether the orifice of the filling nozzle of the liquid filling machine is damaged. For this phenomenon, we need to repair or replace the orifice of the filling nozzle. The diameter of the orifice cannot be greater than 7.5mm. After fixing the hole diameter, lightly smooth the surface of the hole on water-matte paper.

4. If there is liquid leakage from the liquid outlet at the lower end of the liquid filling machine, the cylinder should be disassembled to replace the random seal. But this place needs to pay attention to the sealing ring with φ65 × 3.1 acid and alkali resistant sealing ring.

The above is the solution to the dripping of the liquid filling machine. For the dripping of the filling machine, it must be handled in time to avoid unnecessary losses!


share to: